In this paper, the vibration of composite cylindrical shell with piezoelectric layers in the interior and exterior surfaces is investigated. The composite shell without piezoelectric layers can be studied and compared the results with the results of other researchers, the cylindrical shell laminated with layers of piezoelectric vibration checked. The result is a three-dimensional elasticity equ...

in this paper, load and buckling mode of a smart column are presented. the theoretical model is a three-layer piezoelectric composite beam that behaves as an axial actuating mechanism. this actuator consists of an elastic core sandwiched between two piezoelectric active outer layers. the piezoelectric layers are polarized transversely, i.e., the polarization vector is parallel to the applied el...

The paper deals with the mechanical behavior of a micro-beam bonded with two piezoelectric layers. The micro-beam is suspended over a fixed substrate and undergoes the both piezoelectric and electrostatic actuation. The piezoelectric layers are poled through the thickness and equipped with surface electrodes. The equation governing the micro-beam deflection under electrostatic pressure is deriv...

In the present study, the classical plate theory (CPT) was used to study sound radiation of forced vibrating thin circular plates coupled with piezoelectric layers using simply supported and clamped boundary conditions. The novelty of the study consists of an exact closed-form solution that was developed without any use of approximation. Piezoelectric, electrical potential loaded in the transve...

In this study buckling analysis of solid rectangular plate made of porous material bounded with the layers of piezoelectric actuators in undrained condition is investigated. Porous material properties vary through the thickness of plate with a specific function. Distributing of the pores through the plate thickness is assumed to be the nonlinear nonsymmetric distribution. The ...

Axisymmetric vibration of an infinite piezolaminated multilayer hollow cylinder made of piezoelectric layers of 6mm class and an isotropic LEMV Linear Elastic Materials with Voids layers is studied. The frequency equations are obtained for the traction free outer surface with continuity conditions at the interfaces. Numerical results are carried out for the inner, middle, and outer hollow piezo...

A multilayer ceramic actuator composed of piezoelectrically active Pb(Zn1/3Nb2/3)0.2–Pb(Zr0.5Ti0.5)O0.8 (PZN–PZT) layers and electrically conducting PZN–PZT/Ag layers was fabricated by the co-extrusion process. For the piezoelectric layers, PZN–PZT, which is sinterable at a low temperature (9001C), was used. For the conducting layers, a PZN–PZT/Ag composite, made by mixing silver particles with...

in this paper, a nonlinear free vibration analysis of thin annular functionally graded (fg) plate integrated with two uniformly distributed actuator layers made of piezoelectric (pzt4) material on the top and bottom surfaces of the annular fg plate is presented based on kirchhoff plate theory. the material properties of the fgm core plate are assumed to be graded in the thickness direction acco...

This paper studies dynamic stability of functionally graded beams with piezoelectric layers subjected to periodic axial compressive load that is simply supported at both ends lies on a continuous elastic foundation. The Young’s modulus of beam is assumed to be graded continuously across the beam thickness. Applying the Hamilton’s principle, the governing dynamic equation is established. The eff...

the levy-type analytical solution is employed for the problem of bending of cross-ply and antisymmetric angle-ply piezoelectric hybrid laminated plates with at least two simply supported opposite edges. the governing equations of equilibrium are derived in the framework of the first-order shear deformation plate theory. the equations are classified according to the crystallography type of piezo...